燃气发电机组保养工作应按规定的日保养、周保养、月保养要求进行，这样才能延长燃气发电机组的使用寿命，减少机组故障的出现。下面我们就来看一下燃气发电机组的维护保养。

The maintenance work of gas generator sets should be carried out according to the prescribed daily, weekly, and monthly maintenance requirements, in order to extend the service life of gas generator sets and reduce the occurrence of unit failures. Now let's take a look at the maintenance and upkeep of gas generator sets.

　　1、润滑系统的保养。该种类型机组由于存在运转部件多,运转部件工作条件恶劣,大多处在高温、高冲击载荷状态下,需要润滑的部位较多,对润滑系统的可靠性要求较为苛刻,因此要注意检查润滑油系统的油质情况、油位情况、油温和油压情况,注意离心滤清器和机油滤清器的清洗,避免出现因润滑不良造成的机组零部件磨损加剧,缩短机组零部件的使用寿命,加大维护工作量;

1. Maintenance of lubrication system. This type of unit has many operating components and harsh working conditions, most of which are in high temperature and high impact load conditions. There are many parts that need lubrication, and the reliability requirements of the lubrication system are relatively strict. Therefore, it is necessary to pay attention to checking the oil quality, oil level, oil temperature, and oil pressure of the lubrication oil system, and pay attention to cleaning the centrifugal filter and oil filter to avoid intensified wear of unit components caused by poor lubrication, shorten the service life of unit components, and increase maintenance workload;

　　2、空气过滤器的保养。空气过滤器天然气发电机组如果运转良好的话,将有效地避免因进气阻力大引起的增压压力下降过大,进而造成涡轮增压器出现漏油现象;还可避免因流量减少引起的涡轮增压器压气机喘振现象。因此要定期清理空气过滤器,必要时更换新滤芯。在潮湿地区可将纸质滤芯抽掉

2. Maintenance of air filters. If the natural gas generator set with air filter operates well, it will effectively avoid excessive pressure drop caused by high intake resistance, which will lead to oil leakage in the turbocharger; It can also avoid the phenomenon of turbocharger compressor surge caused by flow reduction. Therefore, it is necessary to regularly clean the air filter and replace it with a new filter element if necessary. Paper filter cartridges can be removed in damp areas

　　3.、相关间隙和角度的检查和调整。主要是火花塞间隙、气门间隙和配气定时等的检查和调整。

3. Inspection and adjustment of relevant gaps and angles. Mainly for inspection and adjustment of spark plug clearance, valve clearance, and valve timing.

　　通过这些规定的保养,能及时发现机组是否存在声音异常、动作异常、外观异常、温度异常、压力异常和气味异常等故障现象,从而及时对机组进行检查和调整,进而有针对性的加以解决,确保机组运行在最佳状态。

Through these prescribed maintenance measures, it is possible to promptly detect any malfunctions such as abnormal sound, abnormal operation, abnormal appearance, abnormal temperature, abnormal pressure, and abnormal odor in the unit. This allows for timely inspection and adjustment of the unit, and targeted solutions to ensure that it operates at its optimal state.

　　本文由  燃气发电机组 友情奉献。更多有关的知识请点击: http://www.huannengpower.com 真诚的态度，为您提供为全面的服务。更多有关的知识我们将会陆续向大家奉献，敬请期待。

This article is dedicated to the friendship of gas generators. For more information, please click on: http://www.huannengpower.com Sincere attitude, providing you with comprehensive service. We will gradually contribute more relevant knowledge to everyone, please stay tuned.